Daily maintenance tips for sheet metal fiber laser cutting machine in summer
The temperature rises in summer, and the working pressure of the cooling system of the sheet metal fiber laser cutting machine increases. It is recommended to maintain
the pressure of the cooler before the high temperature comes. The pressure of the equipment of different manufacturers is also different. It is recommended to consult the
equipment manufacturer before maintenance…
The temperature rises in summer and the working pressure of the cooling system of the sheet metal fiber laser cutting machine increases. It is recommended to maintain
the pressure of the cooler before the high temperature comes. The pressure of the equipment of different manufacturers is also different. It is recommended to consult the
equipment manufacturer for specific parameters before maintenance.
Make sure that the laser tube is filled with circulating water before the machine works. The water quality and temperature of the circulating water directly affect the
service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. This is best done once a week.
There will be some mirrors and focusing mirrors on the machine. The laser light is emitted from the laser head after being reflected and focused by these lenses.
The lens is easily stained with dust or other contaminants, which can cause laser loss or damage to the lens. So clean the lenses every day. At the same time of cleaning:
The lens should be wiped gently, and the surface coating should not be damaged;
The wiping process should be handled gently to prevent falling;
When installing the focusing lens, be sure to keep the concave surface facing down.
Due to the high temperature in summer, the deterioration rate of the cooling water will also increase. It is recommended that users of sheet metal fiber laser cutting machine
use distilled or pure water and regularly clean up the scale to avoid the adhesion of scale in the laser pipe and affect the laser power. Different types of
sheet metal fiber laser cutting machines have different methods for cleaning scale, and they need to be operated under the guidance of the manufacturer.
Since the dust of the sheet metal fiber laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the
sheet metal fiber laser cutting machine and check the working condition of the cooling fan.
Regular maintenance of the equipment can avoid some problems during the use of the sheet metal fiber laser cutting machine, increase the service life
of some accessories and equipment performance, and secondly increase the efficiency of the equipment, so in addition to the sheet metal fiber laser cutting machine
in summer In addition to maintenance, we should also regularly maintain the sheet metal fiber laser cutting machine.
To maintain the sheet metal fiber laser cutting machine, you need to do the following
- After each use of the fiber metal sheet fiber laser cutting machine, the fiber metal sheet fiber laser cutting machine needs to be properly cleaned, so as to
- avoid the damage of the vulnerable parts.
- Pay attention to the quality of the auxiliary gas of the fiber metal sheet fiber laser cutting machine. The better the quality of the auxiliary gas, the better the
- cutting effect of the fiber metal sheet fiber laser cutting machine.
- The regular inspection of the fiber metal sheet and fiber laser cutting machine should also be done well to avoid the failure of the fiber metal sheet and
- fiber laser cutting machine due to imperfect inspection work.
The above is the maintenance requirements of the fiber metal sheet fiber laser cutting machine. Although the maintenance work requirements of the
fiber metal sheet fiber laser cutting machine are not too high, we must do it carefully.
