The technical characteristics and processing accuracy of the double-machine linkage sheet metal bending machine
Brief introduction of dual-machine linkage sheet metal bending machine:
The structure mainly includes a bracket, a working table and a clamping plate. The working table is placed on the bracket. The working table is composed of a base
and a pressing plate. The base is connected to the clamping plate through a hinge. The base is composed of a housing, a coil and a cover plate. The coil is placed
In the recess of the seat shell, the top of the recess is covered with a cover plate
Two WC67K series hosts of the same specification are selected, equipped with dual-machine linkage synchronization device.
The linkage of two machine tools can process special long workpieces.
The two machine tools can also be used independently at the same time to improve production efficiency and are equipped with a deflection compensation mechanism.
The synchronization mechanism adopts machine-hydraulic servo and mechanical stop.
The stroke of the upper slide and the position of the back gauge frame adopts motorized quick adjustment, manual fine adjustment, and electronic numerical control display.
The dual-machine linkage sheet metal bending machine is much better than the general sheet metal bending machine, especially in terms of its degree of automation.
Some other types of sheet metal bending machines can not complete the work content through it. This is mainly It is because the two-machine linkage sheet metal
bending machine can adjust the bending angle and realize the synchronization of the bending of the plate.
The dual-machine linkage sheet metal bending machine mainly controls the synchronous operation of the bending process and the positioning of the hydraulic cylinder
at the center when the machine is working at full load, but these problems can be properly solved. Coupled with its fast operation and high performance,
it has quickly become a cost-effective CNC machining equipment in the CNC industry.
The dual-machine linkage sheet metal bending machine has a high-end detection feedback system, and the self-check and fault detection of the machine itself are
mainly used for detection feedback and real-time detection of the position of the slider. Many problems can be solved by virtue of these. It is precisely because the
dual-machine linkage sheet metal bending machine can complete the work that other sheet metal bending machines cannot complete, it has been widely used.
When it comes to dual-machine linkage sheet metal bending machines, it is inevitable to mention the machining accuracy of machine tools.
When it comes to accuracy and quality, bending accuracy is one of the important criteria for measuring equipment. However, it is necessary to learn to distinguish
between the accuracy of the flange length and the accuracy of the angle, but in fact the two are related to each other. Without a high degree of positioning accuracy,
the precision of the angle is almost impossible to achieve.
The accuracy of the bending angle of the dual-machine linkage sheet metal bending machine is not only a result of high positioning accuracy, but also largely
depends on physical influence parameters. Therefore, when the pressure is high, the slight bending of the machine itself is inevitable. In addition, each sheet
has its own special performance characteristics, so all these influencing factors must be compensated during the bending process.